Kitchen wastewater rich in fats, oils and grease (FOG) discharged down the drain has negative effect on your business. FOG solidify, block pipes, produce undesirable smell and pose risk to clean and hygienic environment in your kitchen. Best solution for stopping FOG is a grease separator.

Grease Trap

Design for below-sink use in commercial kitchens and other food service establishments. Aqua Mundus AGT-40, 80, 120 grease trap prevents grease and food debris from entering drains. Ensures that inner pipework is protected. It´s suitable for use in areas where large grease separator cannot be installed.

 GreaseShield® removes and dewaters organic solid matter (by means of a Pre Filter or FilterShield® and optional internal Automatic Solids Removal / Transfer system) that is typically entrained in the effluent preventing anaerobic foul smelling conditions brought about by biological activity, depleting dissolved oxygen present in the effluent. Because biological degradation of organic matter in water is substantially prevented, BOD, COD, FOG and SS loadings are significantly reduced. GreaseShield® recirculates grey effluent internally pulsing 5 Min on 5 min off, to promote greater efficiency of FOG removal and to assist in removing “floaty” dairy products. This process avoids the usage of potable water.

Brand new product. Comes with 1 year parts and labour warranty.Key features.

The workhorse of the catering industry, the fetcher and carrier has so many uses from a food server to a clearing trolley. Uprights are made from 30mm square section stainless steel (type 304). Shelves manufactured from 1.2mm stainless steel (type 304) with radius internal corners and a 40mm raised lip and rolled edge all round to retain load. Full width robust stainless steel push pull handles at both ends. All welded construction to form a heavy duty unit. Four revolving buffers fitted as standard. Complete with 125mm diameter. Swivel castors two with brakes. Option of two three or four shelves providing maximum storage. The robust compact mobile design provides sturdy and hygienic conveyance in a busy catering kitchen.

Brand new product. Comes with 1 year parts and labour warranty.Key features.

The workhorse of the catering industry, the fetcher and carrier has so many uses from a food server to a clearing trolley. Uprights are made from 30mm square section stainless steel (type 304). Shelves manufactured from 1.2mm stainless steel (type 304) with radius internal corners and a 40mm raised lip and rolled edge all round to retain load. Full width robust stainless steel push pull handles at both ends. All welded construction to form a heavy duty unit. Four revolving buffers fitted as standard. Complete with 125mm diameter. Swivel castors two with brakes. Option of two three or four shelves providing maximum storage. The robust compact mobile design provides sturdy and hygienic conveyance in a busy catering kitchen.