Aqua Mundus Grease Trap AGT040 with stainer basket 40L.
£605.00 Plus VAT
Aqua Mundus Grease Trap AGT120 with stainer basket 120L.
£853.00 Plus VAT
Aqua Mundus Grease Trap AGT080 with stainer basket 80L.
£743.00 Plus VAT
Brand new product. Comes with 2 year parts and labour warranty.Key features.
Kitchen wastewater rich in fats, oils and grease (FOG) discharged down the drain has negative effect on your business. FOG solidify, block pipes, produce undesirable smell and pose risk to clean and hygienic environment in your kitchen. Best solution for stopping FOG is a
grease separator.
Grease Trap
Design for below-sink use in commercial kitchens and other food service establishments. Aqua Mundus AGT-40, 80, 120 grease trap prevents grease and food debris from entering drains. Ensures that inner pipework is protected. It´s suitable for use in areas where large grease separator cannot be installed.
3 in stock
Description
Aqua Mundus Grease Trap AGT080 with stainer basket 80L.
Kitchen wastewater rich in fats, oils and grease (FOG) discharged down the drain has negative effect on your business. FOG solidify, block pipes, produce undesirable smell and pose risk to clean and hygienic environment in your kitchen. Best solution for stopping FOG is a
grease separator.
Grease Trap
Design for below-sink use in commercial kitchens and other food service establishments. Aqua Mundus AGT-40, 80, 120 grease trap prevents grease and food debris from entering drains. Ensures that inner pipework is protected. It´s suitable for use in areas where large grease separator cannot be installed.
Benefits
Protection of inner pipes against clogging
Space effective solution
Biological dosing possibility
Features
Odour proof hygienic seal
Available in 3 sizes: 40, 80 and 120 litres
Manufactured in stainless steel 304, a smooth and non-corrosive material
Adjustable rubber feet or optional castors for Mobile or Stationary installation
In-built directional flow control in the inlet guides waste water downwards into the grease trap
Food waste basket at inlet
Easy fit flexible couplers
Slopped internal bottom & drain valve
The AGT grease trap is a cost-effective system designed to remove FOG and food. It is a container, sized to fit below a sink, away from the operational area, and ideal for a smaller kitchen or where space is limited. The position of the unit’s inlet ensures waste water remains in the grease trap for the FOG and food debris separation process to take place. A basket, made from perforated stainless steel, separates bigger food particles from the waste water. Inside the grease trap there are two baffles to hold FOG in the container, while the heavier food particles sink to the bottom. Sealed lid preventing escape of unpleasant odours
or email: sales@islandcatering.co.uk for further information
We have a vast selection of Commercial Catering Equipment in stock so please have a look at the rest of our products on our website. Brand new parts will be dispatched and delivered between 1-3 working days. Commercial Kitchen Equipment delivery is made to kerbside only. Drivers do not unpack or position goods.
Thanks!
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
Aqua Mundus Grease Capture AGC220 floor standing 2.2 LPS 2 chambre.
Brand new product. Comes with 2 year parts and labour warranty.Key features.
Kitchen wastewater rich in fats, oils and grease (FOG) discharged down the drain has negative effect on your business. FOG solidify, block pipes, produce undesirable smell and pose risk to clean and hygienic environment in your kitchen. Best solution for stopping FOG is a grease separator.
Grease Capture
Aqua Mundus Grease Capture is designed for food service establishments where space is limited and a larger grease separator cannot be installed. Removing FOG before it enters the drainage system and protects against blockages.
Automatically removes fats, oils and greases from wastewater.
Greaseshield Grease Trap System GS1850-F (Defender).
Brand new product. Comes with 2 year parts and labour warranty.Key features.
Fats, oils and grease are a major problem for any commercial kitchen; they can lead to high costs for drain treatment, disposal of waste oils and are a potential health hazard. The GreaseShield unit can solve this problem.
GreaseShield is a proactive grease trap designed to deal with emulsified and saturated animal fats and FOG’s, before they solidify.
Moffat S-Steel SSU127BD sink 120x70x90 single bowl 60×45.
Brand new product. Comes with 1 year parts and labour warranty.Key features.
Sink Tops and Sink Bowls are manufactured from 304 type stainless steel. Specially designed and hand crafted to form a single seamless unit with a satin polished finish. Complete with a modern relief patterned wipe clean draining board, anti-drip edges to the front and ends, and a fully welded boxed up-stand to the rear. Unlike standard thin sheet metal pressed type Sink bowls which vary in thickness, E&R Moffat Ltd long life hand crafted bowls retain a constant thickness throughout. The sink bowls have a removable 38mm corner standing waste and overflow kit incorporating a heavy duty perforated stainless steel corner strainer. Standard units are 900mm high to the top of the anti-drip edge and are mounted on square section stainless steel tube legs with adjustable for level flanged floor fixing feet. Additionally as standard sink units have a stainless steel fixed under shelf set at 250mm from floor level. Units up to and including 2100mm have four legs, Units longer than 2100mm have 6 legs.
Moffat S-Steel SSU157BBD sink 150x70x90 double bowl 50×45.
Brand new product. Comes with 1 year parts and labour warranty.Key features.
The workhorse of the catering industry, the fetcher and carrier has so many uses from a food server to a clearing trolley. Uprights are made from 30mm square section stainless steel (type 304). Shelves manufactured from 1.2mm stainless steel (type 304) with radius internal corners and a 40mm raised lip and rolled edge all round to retain load. Full width robust stainless steel push pull handles at both ends. All welded construction to form a heavy duty unit. Four revolving buffers fitted as standard. Complete with 125mm diameter. Swivel castors two with brakes. Option of two three or four shelves providing maximum storage. The robust compact mobile design provides sturdy and hygienic conveyance in a busy catering kitchen.
Moffat S-Steel SSU157BD sink 150x70x90 single bowl 60×45.
Brand new product. Comes with 1 year parts and labour warranty.Key features.
The workhorse of the catering industry, the fetcher and carrier has so many uses from a food server to a clearing trolley. Uprights are made from 30mm square section stainless steel (type 304). Shelves manufactured from 1.2mm stainless steel (type 304) with radius internal corners and a 40mm raised lip and rolled edge all round to retain load. Full width robust stainless steel push pull handles at both ends. All welded construction to form a heavy duty unit. Four revolving buffers fitted as standard. Complete with 125mm diameter. Swivel castors two with brakes. Option of two three or four shelves providing maximum storage. The robust compact mobile design provides sturdy and hygienic conveyance in a busy catering kitchen.
Moffat S-Steel SSU157DB sink 150x70x90 single bowl 60×45 725
Brand new product. Comes with 1 year parts and labour warranty.Key features.
The workhorse of the catering industry, the fetcher and carrier has so many uses from a food server to a clearing trolley. Uprights are made from 30mm square section stainless steel (type 304). Shelves manufactured from 1.2mm stainless steel (type 304) with radius internal corners and a 40mm raised lip and rolled edge all round to retain load. Full width robust stainless steel push pull handles at both ends. All welded construction to form a heavy duty unit. Four revolving buffers fitted as standard. Complete with 125mm diameter. Swivel castors two with brakes. Option of two three or four shelves providing maximum storage. The robust compact mobile design provides sturdy and hygienic conveyance in a busy catering kitchen.
Moffat S-Steel SSU187BBD sink 180x70x90 double bowl 60×45.
Brand new product. Comes with 1 year parts and labour warranty.Key features.
The workhorse of the catering industry, the fetcher and carrier has so many uses from a food server to a clearing trolley. Uprights are made from 30mm square section stainless steel (type 304). Shelves manufactured from 1.2mm stainless steel (type 304) with radius internal corners and a 40mm raised lip and rolled edge all round to retain load. Full width robust stainless steel push pull handles at both ends. All welded construction to form a heavy duty unit. Four revolving buffers fitted as standard. Complete with 125mm diameter. Swivel castors two with brakes. Option of two three or four shelves providing maximum storage. The robust compact mobile design provides sturdy and hygienic conveyance in a busy catering kitchen.
Reviews
There are no reviews yet.