Aqua Mundus Grease Trap AGT080 with stainer basket 80L.
£743.00 Plus VAT
Greaseshield Grease Trap System GS1000-F (Defender).
£2,420.00 Plus VAT
Aqua Mundus Grease Trap AGT120 with stainer basket 120L.
£853.00 Plus VAT
Brand new product. Comes with 2 year parts and labour warranty.Key features.
Kitchen wastewater rich in fats, oils and grease (FOG) discharged down the drain has negative effect on your business. FOG solidify, block pipes, produce undesirable smell and pose risk to clean and hygienic environment in your kitchen. Best solution for stopping FOG is a
grease separator.
Grease Trap
Design for below-sink use in commercial kitchens and other food service establishments. Aqua Mundus AGT-40, 80, 120 grease trap prevents grease and food debris from entering drains. Ensures that inner pipework is protected. It´s suitable for use in areas where large grease separator cannot be installed.
3 in stock
Description
Aqua Mundus Grease Trap AGT120 with stainer basket 120L.
Kitchen wastewater rich in fats, oils and grease (FOG) discharged down the drain has negative effect on your business. FOG solidify, block pipes, produce undesirable smell and pose risk to clean and hygienic environment in your kitchen. Best solution for stopping FOG is a
grease separator.
Grease Trap
Design for below-sink use in commercial kitchens and other food service establishments. Aqua Mundus AGT-40, 80, 120 grease trap prevents grease and food debris from entering drains. Ensures that inner pipework is protected. It´s suitable for use in areas where large grease separator cannot be installed.
Benefits
Protection of inner pipes against clogging
Space effective solution
Biological dosing possibility
Features
Odour proof hygienic seal
Available in 3 sizes: 40, 80 and 120 litres
Manufactured in stainless steel 304, a smooth and non-corrosive material
Adjustable rubber feet or optional castors for Mobile or Stationary installation
In-built directional flow control in the inlet guides waste water downwards into the grease trap
Food waste basket at inlet
Easy fit flexible couplers
Slopped internal bottom & drain valve
The AGT grease trap is a cost-effective system designed to remove FOG and food. It is a container, sized to fit below a sink, away from the operational area, and ideal for a smaller kitchen or where space is limited. The position of the unit’s inlet ensures waste water remains in the grease trap for the FOG and food debris separation process to take place. A basket, made from perforated stainless steel, separates bigger food particles from the waste water. Inside the grease trap there are two baffles to hold FOG in the container, while the heavier food particles sink to the bottom. Sealed lid preventing escape of unpleasant odours
or email: sales@islandcatering.co.uk for further information
We have a vast selection of Commercial Catering Equipment in stock so please have a look at the rest of our products on our website. Brand new parts will be dispatched and delivered between 1-3 working days. Commercial Kitchen Equipment delivery is made to kerbside only. Drivers do not unpack or position goods.
Thanks!
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Related products
Aqua Mundus Grease Capture AGC220 floor standing 2.2 LPS 2 chambre.
Brand new product. Comes with 2 year parts and labour warranty.Key features.
Kitchen wastewater rich in fats, oils and grease (FOG) discharged down the drain has negative effect on your business. FOG solidify, block pipes, produce undesirable smell and pose risk to clean and hygienic environment in your kitchen. Best solution for stopping FOG is a grease separator.
Grease Capture
Aqua Mundus Grease Capture is designed for food service establishments where space is limited and a larger grease separator cannot be installed. Removing FOG before it enters the drainage system and protects against blockages.
Automatically removes fats, oils and greases from wastewater.
Aqua Mundus Grease Trap AGT080 with stainer basket 80L.
Brand new product. Comes with 2 year parts and labour warranty.Key features.
Kitchen wastewater rich in fats, oils and grease (FOG) discharged down the drain has negative effect on your business. FOG solidify, block pipes, produce undesirable smell and pose risk to clean and hygienic environment in your kitchen. Best solution for stopping FOG is a grease separator.
Grease Trap
Design for below-sink use in commercial kitchens and other food service establishments. Aqua Mundus AGT-40, 80, 120 grease trap prevents grease and food debris from entering drains. Ensures that inner pipework is protected. It´s suitable for use in areas where large grease separator cannot be installed.
Greaseshield Grease Trap System GS1000-F (Defender).
Brand new product. Comes with 2 year parts and labour warranty.Key features.
GreaseShield® removes and dewaters organic solid matter (by means of a Pre Filter or FilterShield® and optional internal Automatic Solids Removal / Transfer system) that is typically entrained in the effluent preventing anaerobic foul smelling conditions brought about by biological activity, depleting dissolved oxygen present in the effluent. Because biological degradation of organic matter in water is substantially prevented, BOD, COD, FOG and SS loadings are significantly reduced. GreaseShield® recirculates grey effluent internally pulsing 5 Min on 5 min off, to promote greater efficiency of FOG removal and to assist in removing “floaty” dairy products. This process avoids the usage of potable water.
Greaseshield Grease Trap System GS1000-PF.
Brand new product. Comes with 2 year parts and labour warranty.Key features.
Grease Shield is effective at preventing blockages in drains and protecting pump stations whilst significantly reducing the load on waste water treatment plants. Grease Shield products protect the environment whilst harvesting grease which can be utilised as a source of renewable energy. The grease Shield GS1000-PF is one product of a range of user friendly, pro-active, fully automated mechanical grease traps which effectively and efficiently separate and remove food solids, fats, oils and greases.
Moffat S-Steel SSU127DB sink 120x70x90 single bowl 60×45.
Brand new product. Comes with 1 year parts and labour warranty.Key features.
The workhorse of the catering industry, the fetcher and carrier has so many uses from a food server to a clearing trolley. Uprights are made from 30mm square section stainless steel (type 304). Shelves manufactured from 1.2mm stainless steel (type 304) with radius internal corners and a 40mm raised lip and rolled edge all round to retain load. Full width robust stainless steel push pull handles at both ends. All welded construction to form a heavy duty unit. Four revolving buffers fitted as standard. Complete with 125mm diameter. Swivel castors two with brakes. Option of two three or four shelves providing maximum storage. The robust compact mobile design provides sturdy and hygienic conveyance in a busy catering kitchen.
Moffat S-Steel SSU157BBD sink 150x70x90 double bowl 50×45.
Brand new product. Comes with 1 year parts and labour warranty.Key features.
The workhorse of the catering industry, the fetcher and carrier has so many uses from a food server to a clearing trolley. Uprights are made from 30mm square section stainless steel (type 304). Shelves manufactured from 1.2mm stainless steel (type 304) with radius internal corners and a 40mm raised lip and rolled edge all round to retain load. Full width robust stainless steel push pull handles at both ends. All welded construction to form a heavy duty unit. Four revolving buffers fitted as standard. Complete with 125mm diameter. Swivel castors two with brakes. Option of two three or four shelves providing maximum storage. The robust compact mobile design provides sturdy and hygienic conveyance in a busy catering kitchen.
Moffat S-Steel SSU157DBB sink 150x70x90 double bowl 50×45.
Brand new product. Comes with 1 year parts and labour warranty.Key features.
The workhorse of the catering industry, the fetcher and carrier has so many uses from a food server to a clearing trolley. Uprights are made from 30mm square section stainless steel (type 304). Shelves manufactured from 1.2mm stainless steel (type 304) with radius internal corners and a 40mm raised lip and rolled edge all round to retain load. Full width robust stainless steel push pull handles at both ends. All welded construction to form a heavy duty unit. Four revolving buffers fitted as standard. Complete with 125mm diameter. Swivel castors two with brakes. Option of two three or four shelves providing maximum storage. The robust compact mobile design provides sturdy and hygienic conveyance in a busy catering kitchen.
Reviews
There are no reviews yet.